BioSmart + Terminals
The Ultimate Synergy of Smartcards, Biometrics and Advanced Encryption.
The Perfect Solution for High Traffic Access Control and Timekeeping.
The VeryFast brings to the Systems Integrator all the advantages of Biomet's well proven 2-Finger Geometry Biometrics combined with advanced Access Control, packaged in a small, robust and nicely designed housing for simple plug-and-play installation. Various optional features and custom specific design possibilities are available to optimally adapt the VeryFast to the individual application requirements.
For users, the VeryFast is convenient, non-threatening, fast and accurate, and quickly builds a high degree of confidence in its positive security merits. Users touch a platen with the first two fingers of either hand to prove their identity. The VeryFast works equally well with the right or left hand.
Biometric Features
Data Capture
Operational Speed
Accuracy
VeryFast™ Standard Features and Functions
Robust housing which provides space and flexibility to install one or several optional components/ features (see below). Front panel designed to accommodate different combinations of standard and optional components.
Basic model (model MS) comes equipped with a standard Magnetic STripe Card Reader (ISO 3554, track 2) and one serial I/O port with RS-232/485 selectable interface (9600 baud).
Interface electronics to provide a real-time clock, networking, and operating features listed below:
Network Comms Port RS-232, RS-485 and TTL Communications I/O connectors
Optional System Interface Selectable ASCII, Weigand I or Weigand II Emulation, ISO track 1 or 2 magnetic stripe or barcode compatible format.
User Capacity: On board data memory for up to 999 users. Special Versions (off-line / standalone) expandable to 8,000 users. Max 20 bytes per user.
LCD Display for user or supervisory instructions, 2 lines of 16 characters.
LED Array and finger outline to guide placement of two fingers of either hand.
Beeper to indicate "Ready" and "Accept" or "Reject".
Selectable Authenticate/Verify or Pinless "Who AM I?" Identification Mode.
Door Lock Output NO/NC contact. Switched at 2A.
Alarm Outputs Tamper Switch, Power Failure, Door Contact Open.
REX Request to Exit Switch from secure side.
Input Voltage 10-14 VDC, 2.5A peak, 0.6A idle.
Optional Features
The VeryFast can be equipped with the following readers:
Keypad, 12 keys.
Networking Interface, 24/9600-Baud Modem or TCP/IP Ethernet 10-base-T (802.3).
Transaction Data Memory 32 Kb, addressable, non-volatile, for on-board buffering.
Provision for Auxiliary Inputs/Outputs such as timekeeping interface, motion/heat detectors, etc.
Addition of BioSmart+ smartcard read-writer with encryption facility (SAM-Secure Application Module).
Physical Specifications
Thursday, May 4, 2006