K-NET IP Alarm Communicator for KYO320 Intrusion Control Panels

Bentel Security would like to introduce K-NET, the new IP module for KYO320 control panels.

IP Alarm Communicator Module

The K-NET connects directly to the KYO320 control panels using the PC-LINK cable, providing a TCP/IP connection that sends predefined Contact ID codes to the central monitoring station. The K-NET communication stream is small and requires only a limited amount of network bandwidth. This ensures that the integrity of the data being transferred never becomes compromised. To reduce security risks, the module utilizes industry-leading, 128-bit AES encryption, polling and hardware substitution protection.

Product Features

• Compatible with KYO320 control panels
• 2-way, always-on IP communication
• Works over local LAN/WAN network or the Internet
• 128-bit AES encryption
• Supports DHCP (dynamic IP addresses)
• Reports events to 2 different receiver IP addresses
• Polling and hardware substitution protection
• Low network bandwidth requirements
• Compatible with 10/100BaseT networks
• 1 programmable trouble output • Programmable through the BSS Console software
• CE listed

KYO320 Expandable Hybrid Panel for Large-Scale Installations

• Normal or EN50131 operating mode may be selected for each keypad and each reader: in the EN50131 mode, system status information is “hidden” from anyone who does not have a code or a valid key.
• 8 programmable zones - expandable to 328
• 3 supervised 3 A relay outputs and 3 programmable 1 A open collector outputs
• Expandable up to 102 outputs trough 16 M-IN/OUT modules by 6 outputs
• supports up to 32 PREMIUM Line and CLASSIKA Series LCDkeypads
• Manages 500 keys, proximity cards and tags
• Supports up to 32 keyfobs via wireless receivers VRX32-433/868
• 10,000 event logger with date and time
• 4 Arm/Disarm actions per day per partition - selected from 16 programmable day types
• Up to 8 BXM12 power supply stations to extend the length of the BPI bus and provide extra power